“质量源于设计”在制备<i>N</i>-乙酰半胱氨酸注射液中的应用

张莉燕; 宋金春

doi:10.3969/j.issn.1006-0111.2019.06.016

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

x 关闭永久关闭

应中央军委要求，2022年9月起，《药学实践杂志》将更名为《药学实践与服务》，双月刊，正文96页；2023年1月起，拟出版月刊，正文64页，数据库收录情况与原《药学实践杂志》相同。欢迎作者踊跃投稿！

“质量源于设计”在制备N-乙酰半胱氨酸注射液中的应用

张莉燕, 宋金春

文章导航 > 药学实践与服务 > 2019 > 37(6): 552-558

张莉燕, 宋金春. “质量源于设计”在制备N-乙酰半胱氨酸注射液中的应用[J]. 药学实践与服务, 2019, 37(6): 552-558. doi: 10.3969/j.issn.1006-0111.2019.06.016

引用本文:

张莉燕, 宋金春. “质量源于设计”在制备N-乙酰半胱氨酸注射液中的应用[J]. 药学实践与服务, 2019, 37(6): 552-558. doi: 10.3969/j.issn.1006-0111.2019.06.016

ZHANG Liyan, SONG Jinchun. Preparation of N-acetylcysteine injection based on quality by design[J]. Journal of Pharmaceutical Practice and Service, 2019, 37(6): 552-558. doi: 10.3969/j.issn.1006-0111.2019.06.016

Citation:

ZHANG Liyan, SONG Jinchun. Preparation of N-acetylcysteine injection based on quality by design[J]. Journal of Pharmaceutical Practice and Service, 2019, 37(6): 552-558. doi: 10.3969/j.issn.1006-0111.2019.06.016

“质量源于设计”在制备N-乙酰半胱氨酸注射液中的应用

doi: 10.3969/j.issn.1006-0111.2019.06.016

武汉大学人民医院药学部, 湖北武汉 430060

Preparation of N-acetylcysteine injection based on quality by design

Department of Pharmacy, Renmin Hospital of Wuhan University, Wuhan 430060, China

摘要: 目的基于质量源于设计（quality by design，QbD）理念优化N-乙酰半胱氨酸（NAC）注射液的处方及制备工艺。方法以QbD理念为核心，通过查阅文献获得关键质量属性（critical quality attributes，CQAs），采用鱼骨图结合失效模式与效应分析法（failure mode and effects analysis，FMEA）筛选影响注射液质量的关键工艺参数（critical process parameters，CPPs），使用Minitab软件进行试验设计，建立设计空间。结果以灭菌前后pH值变化量，以主药含量为评价指标，通过鱼骨图结合FEMA确定了依地酸钙钠添加量、配液温度和灭菌条件为影响实验结果的关键工艺参数，方差分析结果显示建立的工艺参数与评价指标的数学模型P值均小于0.05，表明预测能力较好，得到的最佳参数为：依地酸钙钠添加量0.049 192%，最佳配液温度60℃，灭菌条件116℃，40 min。结论基于QbD理念设计的NAC注射液处方合理，工艺参数稳定，建立的设计空间提高了工艺的耐用性，保证了制剂质量的均一可控。
- 质量源于设计 /
- N-乙酰半胱氨酸 /
- 试验设计
Abstract: Objective To optimize the formulation and preparation technology of N-acetylcysteine(NAC) injection based on the concept of quality by design(QbD). Methods Using QbD as the guidance,the critical quality attributes affecting the quality of the injection were determined through literature and the critical process parameters were determined by fishbone diagram and failure mode and effects analysis.Minitab was applied to design experiments and analyze results and design space was established. Results The evaluation indexes were the pH changes before and after sterilization and the concent of NAC.The addition of sodium calcium edetate,preparation temperature and sterilization condition were determined as the critical quality attributes by fishbone diagram and FMEA.The results of variance analysis showed that the P value of the established mathematical models of the process parameters and evaluation indexes were less than 0.05,which indicated that the models had good prediction ability.The optimal parameters were the addition amount of calcium edetate was 0.049 192%,the preparation temperature was 60℃,and the sterilization condition was 116℃,40 min. Conclusion The prescription was reasonable,the process was stable and the established design space based on the concept of QbD improved the durability of the process and ensured uniform and controllability of the quality of the injection.
- quality by design /
- N-acetylcysteine /
- design of experiment

[1]	FDA.Pharmaceutical cGMPs for the 21st Century-A Risk Based Approach[EB/OL].US,2004,[2019-02-22].https://www.fda.gov/aboutfda/centersoffices/officeofmedicalproductsandtobacco/cder/ucm128080.htm.
[2]	International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use(ICH).Harmonized Tripartite Guideline,Q8,Pharmaceutical Development,Current Step 4 Version[EB/OL].US,2004(2009-08).[2019-02-22].https://www.ich.org/fileadmin/Public_Web_Site/ICH_Products/Guidelines/Quality/Q8_R1/Step4/Q8_R2_Guideline.pdf.
[3]	陈柽,李冰韶,王永洁,等.设计空间法优化红花温浸提取工艺[J].中草药,2018,49(19):4544-4551.
[4]	ARAKAWA M,ITO Y.N-acetylcysteine and neurodegenerative diseases:basic and clinical pharmacology[J].Cerebellum,2007,6(4):308-314.
[5]	GREEN J L,HEARD K J,REYNOLDS K M,et al.Oral and intravenous acetylcysteine for treatment of acetaminophen toxicity:a systematic review and meta-analysis[J].West J Emerg Med,2013,14(3):218-226.
[6]	BAVARSAD SHAHRIPOUR R,HARRIGAN M R,ALEXANDROV A V.N-acetylcysteine (NAC) in neurological disorders:mechanisms of action and therapeutic opportunities[J].Brain Behav,2014,4(2):108-122.
[7]	MINARINI A,FERRARI S,GALLETTI M,et al.N-acetylcysteine in the treatment of psychiatric disorders:current status and future prospects[J].Expert Opin Drug Metab Toxicol,2017,13(3):279-292.
[8]	蒋煜,杨建红,王亚敏."质量源于设计"在仿制注射剂处方工艺研究中的应用[J].中国新药杂志,2014,23(8):921-924,954.
[9]	崔向龙,徐冰,孙飞,等.质量源于设计在银杏叶片制粒工艺中的应用(III):基于设计空间的过程控制策略[J].中国中药杂志,2017,42(6):1048-1054.

点击查看大图

计量

文章访问数: 4753
HTML全文浏览量: 754
PDF下载量: 871
被引次数: 0

“质量源于设计”在制备N-乙酰半胱氨酸注射液中的应用

doi: 10.3969/j.issn.1006-0111.2019.06.016

武汉大学人民医院药学部, 湖北武汉 430060

收稿日期: 2019-03-03
修回日期: 2019-04-28

关键词:

质量源于设计 /

N-乙酰半胱氨酸 /

试验设计

摘要: 目的基于质量源于设计（quality by design，QbD）理念优化N-乙酰半胱氨酸（NAC）注射液的处方及制备工艺。方法以QbD理念为核心，通过查阅文献获得关键质量属性（critical quality attributes，CQAs），采用鱼骨图结合失效模式与效应分析法（failure mode and effects analysis，FMEA）筛选影响注射液质量的关键工艺参数（critical process parameters，CPPs），使用Minitab软件进行试验设计，建立设计空间。结果以灭菌前后pH值变化量，以主药含量为评价指标，通过鱼骨图结合FEMA确定了依地酸钙钠添加量、配液温度和灭菌条件为影响实验结果的关键工艺参数，方差分析结果显示建立的工艺参数与评价指标的数学模型P值均小于0.05，表明预测能力较好，得到的最佳参数为：依地酸钙钠添加量0.049 192%，最佳配液温度60℃，灭菌条件116℃，40 min。结论基于QbD理念设计的NAC注射液处方合理，工艺参数稳定，建立的设计空间提高了工艺的耐用性，保证了制剂质量的均一可控。